IPO
IPO Lot Size and Minimum Investment: How to Calculate It
Learn how IPO lot size and minimum investment work in India, with a step-by-step calculation, retail Rs 2 lakh limit, and how the amount is blocked.
WealthDox Editorial · Published 11/11/2026 · 7 min read · Updated 11/11/2026
What Is IPO Lot Size? Meaning and Key Takeaways
- Lot size
- fixed number of shares per bid
- Retail minimum
- one lot
- Retail cap
- Rs 2 lakh
- Blocked amount
- held until allotment
IPO lot size is the fixed number of shares that an investor must apply for in an initial public offer. The company and its lead managers decide this number before the issue opens, and it is shown in the offer documents and on the application form.
In most IPOs you cannot bid for a single share. You bid in multiples of the lot size, so every application is one lot or more.
Key takeaways:
- Lot size is set by the company before the issue opens
- Every investor in the same IPO gets the same lot size
- A bigger lot means a bigger minimum amount
- Lot size changes from one IPO to another
Lot size is not the same as the price band. The price band is the range of prices per share, while the lot size is how many shares you ask for. You need both numbers to know how much money to set aside.
You can check the lot size on the IPO detail page of WealthDox or on the application form before you bid.
Good to know
Lot size differs across IPOs, so never assume the number from a previous issue applies to a new one.
Minimum Application for Retail Investors: Lot Size Rules
Retail individual investors usually bid at the cut-off price, which means they agree to pay the upper end of the price band. Their minimum application is therefore one lot, valued at the upper price band. This is the amount that the bank or UPI handle sets aside when you apply.
To find your minimum application, follow these steps:
- Note the lot size from the IPO announcement.
- Note the upper end of the price band.
- Multiply the lot size by the upper price.
The result is the minimum amount you need available for a retail bid. The lower price band gives a lower figure, but the blocking is usually based on the upper price.
| Item | Typical rule for retail |
|---|---|
| Minimum bid | One lot |
| Bid category | Retail individual investors |
| Price used for blocking | Upper end of price band (cut-off) |
| Maximum bid | Rs 2 lakh in total |
Tip
Worked IPO Lot Size Calculation Example With Illustrative Numbers
The example below uses made-up numbers for teaching purposes only. It does not refer to any real company or live issue.
Assume the price band is Rs 100 to Rs 110 per share, and the lot size is 130 shares.
- Minimum at lower price: 130 x Rs 100 = Rs 13,000
- Minimum at upper price: 130 x Rs 110 = Rs 14,300
- Retail cut-off amount for one lot: Rs 14,300
To find the largest number of lots within the Rs 2 lakh retail limit, divide Rs 2,00,000 by Rs 14,300. That gives about 13.9, so you can apply for up to 13 lots.
| Lots applied | Shares | Amount at Rs 100 | Amount at Rs 110 (cut-off) |
|---|---|---|---|
| 1 lot | 130 | Rs 13,000 | Rs 14,300 |
| 2 lots | 260 | Rs 26,000 | Rs 28,600 |
| 5 lots | 650 | Rs 65,000 |
Applying for More Lots in an IPO: Multiple Lot Bids
Retail investors can apply for more than one lot, as long as the total stays within the Rs 2 lakh limit at the cut-off price. You cannot apply for a part of a lot, so every bid must be a whole-number multiple of the lot size.
Using the same illustrative numbers, the table below shows which bids fit the limit at Rs 110.
| Lots applied | Amount at Rs 110 | Within Rs 2 lakh? |
|---|---|---|
| 1 lot | Rs 14,300 | Yes |
| 8 lots | Rs 1,14,400 | Yes |
| 13 lots | Rs 1,85,900 | Yes |
| 14 lots | Rs 2,00,200 | No |
Applying for more lots does not guarantee more shares. In the retail category, allotment is done through a lottery when demand is higher than supply, so you may receive fewer lots than you applied for.
Tip
Applying for a higher number of lots only makes sense if the amount fits your budget and you have read the company's offer documents carefully.
Retail Investor Limit of Rs 2 Lakh in IPO Bidding
The retail investor category in an IPO generally allows bids up to Rs 2 lakh. This cap is set so that individual investors are grouped separately from larger bidders such as high net-worth investors, who have a separate non-institutional category with higher bid sizes.
When you calculate your bid, keep these points in mind:
- The Rs 2 lakh limit applies to the total bid amount, not to the number of shares
- The amount is checked at the cut-off price for retail bidders
- Bids above the limit usually move to the non-institutional category
- Each PAN is allowed one application in the retail category
The limit helps keep allotment fair for smaller investors. It also means that a retail investor who wants a larger bid needs to check whether the issue offers a separate category for that amount.
Watch out
Applying through several accounts or family members' PANs to exceed the limit is not permitted and can lead to rejection of your bids.
How IPO Application Money Is Blocked Through ASBA and UPI
When you apply for an IPO through ASBA, the bid amount is blocked in your bank account instead of being debited. The money stays in your account until allotment is finalised, and you keep any interest it earns during that time.
Most retail applications today are made through UPI, where you approve a mandate in your UPI app.
The blocking process works in these steps:
- You submit the bid with the lot size, quantity and price.
- Your bank or UPI handle blocks the bid amount.
- The registrar finalises the basis of allotment.
- Funds are debited only for the shares you are allotted.
If you do not approve the UPI mandate in time, your bid may not be processed, even if the blocked amount is available.
Tip
Check your UPI app and bank notifications after applying, so you can approve any mandate before the bidding window closes.
Refund of IPO Blocked Funds After Allotment
After the issue closes and allotment is finalised, the blocked money is either debited for allotted shares or released back to your account. The exact timing follows the published IPO timetable, which lists the dates for allotment, refunds and credit of shares.
The table below shows what usually happens to the blocked amount in each case.
| Outcome | What happens to blocked money |
|---|---|
| No allotment | Full blocked amount is released |
| Partial allotment (lottery) | Amount for allotted shares is debited, rest is released |
| Full allotment | Amount for allotted shares is debited, any excess is released |
You can check your allotment status with the registrar using your application number or PAN. Keep your application details safe until the shares are credited to your demat account.
Good to know
If a refund is delayed, contact your bank or the registrar with your application number and the IPO name.
Disclaimer
This article is for general educational purposes only and does not constitute investment, legal or tax advice. The lot sizes, price bands and amounts shown are illustrative examples and do not refer to any real company or live IPO.
IPO investments carry risks, including the possibility of listing below the issue price and of partial or no allotment. Read the offer document carefully and consider your own financial situation, or consult a qualified financial adviser, before applying for any issue.
WealthDox does not guarantee any returns or outcomes from IPO applications.